Freeze
Freeze
Hi,
i am using a Intel-Linux-Box with SUSE 10.1 Linux.
My bzflag client occasionally freezes the whole input and display system (Kernel2.6.16.13-4-default with X.org-mga driver).
Everything is stuck except the mouse pointer. Only a hard reset helps, as i have no second box to try it with telnet/ssh.
It happens totaly randomly. Sometimes I can play for hours, sometimes it happens after a few seconds/minutes.
Any help is appriciated
i am using a Intel-Linux-Box with SUSE 10.1 Linux.
My bzflag client occasionally freezes the whole input and display system (Kernel2.6.16.13-4-default with X.org-mga driver).
Everything is stuck except the mouse pointer. Only a hard reset helps, as i have no second box to try it with telnet/ssh.
It happens totaly randomly. Sometimes I can play for hours, sometimes it happens after a few seconds/minutes.
Any help is appriciated
It is a Matrox G550 card.ducktape wrote:What kind of Video card do you use? Do you have the latest Drivers for it?
X Window System Version 6.9.0
For information: older versions of bzflag are running without problems. But i can´t say since which version the problems started.
I am now using bzflag-2.0.10rc2 and the problem is the same.
Since i have no problems with any other 3D-program, i believe it could be a bzflag-problem.
I googled i bit and saw that a few other people have the same issue, with different cards (nvidia, ...).
Thanks in advance
A hard reset? No need. To kill BZFlag (or any other program) ...
then login, then do
Then some numbers should appear, then do..
Then it's done, then to go back to your desktop..
Perhaps you might not have the problem with SUSE 10.2? It works fine for me.
Code: Select all
CTRL+ALT+F2
then login, then do
Code: Select all
pgrep bzflag
Code: Select all
kill -sigkill <numbers>
Code: Select all
CTRL+ALT+F7
“Roses are #FF0000, violets are #0000FF, all of my base are belong to you.” ~ Nerd on Colour
you can restart the X server with ctrl+alt+backspace. after X restarts, you will be back at the login screen (i use this because i do stuff that crashes X often).PETER wrote:A hard reset? No need. To kill BZFlag (or any other program) ...Code: Select all
CTRL+ALT+F2
then login, then doThen some numbers should appear, then do..Code: Select all
pgrep bzflag
Then it's done, then to go back to your desktop..Code: Select all
kill -sigkill <numbers>
Perhaps you might not have the problem with SUSE 10.2? It works fine for me.Code: Select all
CTRL+ALT+F7
gazz: A bullet may have your name on it, but shrapnel is addressed "to whom it may concern".
http://bash.org/?785529
http://bash.org/?785529
- Think_Different
- Private First Class
- Posts: 108
- Joined: Thu Jan 05, 2006 3:03 am
- Location: Washington, DC
I've had similar problems, however, not just with BZFlag, but with other games. It seems as if the whole system is going down, because the sound stays on for about 30 seconds after there is no response, then that goes off too. Usually, trying to switch to another console (CTRL+ALT+Fx) doesn't work, neither does CTRL+ALT+Backspace. The problem seems to have mostly gone away when I installed a new sound card and tweaked the SLI settings. I'm suspecting an SLI problem, however, this doesn't nessiarily relate to your problem.
-
- Private First Class
- Posts: 204
- Joined: Mon Jan 31, 2005 12:00 am
- Location: hiding behind box...a real Bz coward :/
Some years ago on my linux (Bz old Version 1.8 ) my pc seemed to randomly freeze, too. After a long time of wondering, i then found out that when my linux freezed, then in kinda 100% of all cases it was due to i was shooting a GM trough a teleporter! Very weird.
(No wonder i needed months to find it out, as it seldom happened that i shooted trough teleporters with GM. Maybe it was even depended wheter i activated GM-lock or not, its too long ago, i just dont remember. Edit: Maybe it happend even the other way round, namely when someone shooted trough teleporter with GM in order to hit me.
On the same computer however when i booted with windows my pc never freezed when shooting like described. Well, obviously on windows there were other drivers and other compiled version of bz, so its not a real wonder that there i hadnt this prob)
Would be pure luck if its the same case for u, but who knows!
In this case just dont shoot with GM trough teleporters...lol
(No wonder i needed months to find it out, as it seldom happened that i shooted trough teleporters with GM. Maybe it was even depended wheter i activated GM-lock or not, its too long ago, i just dont remember. Edit: Maybe it happend even the other way round, namely when someone shooted trough teleporter with GM in order to hit me.
On the same computer however when i booted with windows my pc never freezed when shooting like described. Well, obviously on windows there were other drivers and other compiled version of bz, so its not a real wonder that there i hadnt this prob)
Would be pure luck if its the same case for u, but who knows!
In this case just dont shoot with GM trough teleporters...lol
Wirth's law: "Software is getting slower more rapidly than hardware becomes faster."
All methods to go to console fail. The Ctrl-Alt-Backspace does not work. I should connect another pc to my router to telnet/ssh on the linux-box to see which process is dead.
GM to teleporter is not the problem, because it fails on piilbox and ducati (no GM no teleporters) too.
Thank you for all answers
GM to teleporter is not the problem, because it fails on piilbox and ducati (no GM no teleporters) too.
Thank you for all answers
-
- Private First Class
- Posts: 23
- Joined: Fri Dec 15, 2006 12:29 am
-
- Private First Class
- Posts: 23
- Joined: Fri Dec 15, 2006 12:29 am
Well, since you don't seemed inclined to upgrade, I've heard the not only is 10.3 faster than other versions but the package manager is much improved.rotor02 wrote:
That would be my last choice. Everything else works quite good.
Back up your stuff, install 10.3 & I think you'll be a happier person. Personally, I favor Debian & Ubuntu.
Freeze: Solved
Thank you all. I solved the problem with a new graphics card (NVIDIA 6200, before it was a MATROX 550).
After installing the nvidia-drivers and playing some hours, i must say: This was a good choice. The 3D-performance is much better, the signal-quality (vga-analog) is ok for my old 20" display and the best: no freeze
Thank you for all answers
After installing the nvidia-drivers and playing some hours, i must say: This was a good choice. The 3D-performance is much better, the signal-quality (vga-analog) is ok for my old 20" display and the best: no freeze
Thank you for all answers
Freeze
I have a fresh install of Fedora 8 on a dual AMD processor with 4 GB of memory. I have an nvidia video card with the latest drivers.
When I attempt to quit bzflag, my computer locks up tighter than a drum on the Are you sure? prompt.
Is there a fix for this issue?
When I attempt to quit bzflag, my computer locks up tighter than a drum on the Are you sure? prompt.
Is there a fix for this issue?
@rotor02: I had similar problems with an ATI Radeon until I set up a file called
~/.drirc
~> cat ~/.drirc
<driconf>
<device screen="0" driver="r200">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="no_rast" value="false" />
<option name="fthrottle_mode" value="2" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_neg_lod_bias" value="false" />
<option name="texture_units" value="6" />
<option name="dither_mode" value="0" />
<option name="hyperz" value="true" />
<option name="round_mode" value="0" />
<option name="allow_large_textures" value="1" />
<option name="nv_vertex_program" value="true" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="1" />
<option name="texture_blend_quality" value="1.0" />
</application>
</device>
</driconf>
~>
~/.drirc
~> cat ~/.drirc
<driconf>
<device screen="0" driver="r200">
<application name="Default">
<option name="force_s3tc_enable" value="false" />
<option name="no_rast" value="false" />
<option name="fthrottle_mode" value="2" />
<option name="tcl_mode" value="3" />
<option name="texture_depth" value="0" />
<option name="def_max_anisotropy" value="1.0" />
<option name="no_neg_lod_bias" value="false" />
<option name="texture_units" value="6" />
<option name="dither_mode" value="0" />
<option name="hyperz" value="true" />
<option name="round_mode" value="0" />
<option name="allow_large_textures" value="1" />
<option name="nv_vertex_program" value="true" />
<option name="color_reduction" value="1" />
<option name="vblank_mode" value="1" />
<option name="texture_blend_quality" value="1.0" />
</application>
</device>
</driconf>
~>
Bzflag freezes everything...
Sometimes, randomly, bzflag freezes the computer. Ctrl-Alt-Backspace, Ctrl-Alt-F2 does not work. I can login with SSH from another computer and its not slow or anything. I can kill the bzflag process, kill the X server... But the keyboard, mouse and screen stay frozen...
The only way to be able to use the computer (apart from remotely via SSH, or viewing the website using the Web Server, etc.) is to press the power button and wait for [K]Ubuntu to finish the shutdown process (so the machine is not frozen, only the keyboard, mouse and screen).
I can still hear the music from Amarok and the sounds from BZFlag until I kill them via SSH or Ubuntu kills them when shutting down.
This has been happening only recently (I think it wasn't like that around christmas). I use Kubuntu with KDE 4 and the latest nvidia-glx-new drivers. I know that 3d works well because bzflag works , the KDE 4 effects run smoothly and glxinfo gives me Direct rendering: yes. Thanks .
(should I create a new thread for this problem?)
The only way to be able to use the computer (apart from remotely via SSH, or viewing the website using the Web Server, etc.) is to press the power button and wait for [K]Ubuntu to finish the shutdown process (so the machine is not frozen, only the keyboard, mouse and screen).
I can still hear the music from Amarok and the sounds from BZFlag until I kill them via SSH or Ubuntu kills them when shutting down.
This has been happening only recently (I think it wasn't like that around christmas). I use Kubuntu with KDE 4 and the latest nvidia-glx-new drivers. I know that 3d works well because bzflag works , the KDE 4 effects run smoothly and glxinfo gives me Direct rendering: yes. Thanks .
(should I create a new thread for this problem?)