The same is true if I just connect with the pre-populated values.
However, if I "Find Server", the list returns after about 15 seconds and I then have about a 10 second window where I can join without being rejected.
A traceroute to bzflag.org produced the following result (in case it's helpful):
Code: Select all
<snip>
3 31.193.217.1 (31.193.217.1) 1.769 ms 2.727 ms 2.272 ms
4 core.isp.thn.gw1.airspeed.ie (77.75.103.119) 11.770 ms 12.068 ms 12.015 ms
5 * * *
6 be100-1298.nwk-5-a9.nj.us (192.99.146.133) 80.182 ms 80.652 ms 79.893 ms
7 be10-1018.bhs-g2-a9.qc.ca (192.99.146.101) 128.595 ms 141.509 ms 128.406 ms
8 vl21.bhs-g2-a75-lo2.qc.ca (198.27.73.91) 88.621 ms 88.573 ms 88.531 ms
9 po7.bhs-z2g1-a75.qc.ca (198.27.73.61) 88.453 ms 88.966 ms 88.552 ms
10 * * *
11 149.56.59.216 (149.56.59.216) 88.388 ms 88.601 ms 88.559 ms
12 158.69.61.35 (158.69.61.35) 89.329 ms 88.686 ms 88.537 ms
13 bzflag.org (144.217.83.100) 88.566 ms 88.572 ms 89.305 ms[code]
Any ideas what might be going on?